Search

Links
  • DAC121S101 - 12-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output
    The DAC121S101 is a full-featured, general purpose 12-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and consumes just 177µA of current at 3.6V. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range.
    http://www.national.com/pf/DA/DAC121S101.html
  • DAC082S085 - 8-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output from the PowerWise® Family

    The DAC082S085 is a full-featured, general purpose DUAL 8-bit voltage-output DAC that can operate from a single +2.7V to 5.5V supply and consumes 0.6 mW at 3V and 1.6 mW at 5V. The low power consumption and small packages of the DAC082S085 make it an excellent choice for use in battery operated equipment.

    Features

    • Guaranteed Monotonicity
    • Low Power Operation
    • Wide power supply range (+2.7V to +5.5V)
    • Power-on Reset to 0V
    • Power Down Modes
    • Rail-to-Rail Voltage Output
    • Simultaneous Output Updating
    • Industry's Smallest Package

    Applications

    • Programmable Attenuators
    • Programmable Voltage & Current Sources
    • Battery-Powered Instruments
    • Digital Gain and Offset Adjustment

    http://www.national.com/pf/DA/DAC082S085.html
  • DAC081S101 - 8-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output from the PowerWise® Family

    The DAC081S101 is a full-featured, low power, general purpose 8-bit voltage-output DAC that can operate from a single +2.7V to 5.5V supply and consumes just 175 µA of current at 3.6 Volts.

    Features

    • Guaranteed Monotonicity
    • Rail-to-Rail Voltage Output
    • Small Packages
    • Power Down Feature
    • Power-on Reset to Zero Volts Output
    • SYNC Interrupt Facility
    • Wide power supply range (+2.7V to +5.5V)
    • Low Power Operation

    Applications

    • Programmable Voltage & Current Sources
    • Programmable Attenuators
    • Battery-Powered Instruments
    • Digital Gain and Offset Adjustment

    http://www.national.com/pf/DA/DAC081S101.html
  • DAC102S085 - 10-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output
    The DAC102S085 is a full-featured, general purpose DUAL 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and consumes 0.6mW at 3V and 1.6 mW at 5V. A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device.
    http://www.national.com/pf/DA/DAC102S085.html
  • DAC088S085 - 8-Bit Micro Power OCTAL Digital-to-Analog Converter with Rail-to-Rail Outputs
    The DAC088S085 is a full-featured, general purpose OCTAL 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to +5.5V supply and consumes 1.95mW at 3V and 4.85mW at 5V. The DAC088S085 is one of a family of pin compatible DACs, including the 10-bit DAC108S085 and the 12-bit DAC128S085.
    http://www.national.com/pf/DA/DAC088S085.html

Wikipedia Wiki